emi Posted June 10, 2013 Share Posted June 10, 2013 Ciao ragazzi Rinnovo ancora i complimenti per questo lavoro. Visuale abitacolo perfetta. Due domande: Mi sapete consigliare un ffb per questa mod? Che gradi sterzo e parametri per il g25 usate? Link to comment Share on other sites More sharing options...
rdasisva Posted June 10, 2013 Share Posted June 10, 2013 io ho un g27 e uso il reall fell o.93, cosi configurato:MaxForceAtSteeringRack=-1400.000000 SteeringDamper=50000.000000 FFBMixerRealFeelPercent=100.000000 FrontGripEffect=0.200000 SmoothingLevel=0 Kf=4000.000000 Ks=7.000000 A=1.500000 nel profilo logitech cosi.. partendo dall' alto : 100, 0, 0, spunta, 0, poi.. registra pedali combinati no spunta, 418\25 gradi sterzo e in fine spunta a consenti al gioco di adattare le impostazioni Link to comment Share on other sites More sharing options...
rdasisva Posted June 10, 2013 Share Posted June 10, 2013 questo il mio controller :[ Force Feedback ] FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. FFB Effects Level="2" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom. FFB Gain="0.88000" // Strength of Force Feedback effects. Range 0.0 to 1.0. FFB Ignore Controllers="0" // Do not use FFB on: 1=controller1, 2=controller2, 4=controller3 (or add values to ignore multiple controllers) FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis. FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis. FFB steer vibe freq mult="0.50000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration. FFB steer vibe zero magnitude="0.04000" // Magnitude of steering vibration at 0mph (reference point). FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude). FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB steer force prediction="0.00100" // Time into the future that force is predicted, to help counteract wheel latency (0.0 to disable) FFB steer force max change="100.00000" // Maximum change per second based on current difference between calculated and applied force, to help avoid jerky behavior (values under 15 or so should reduce jerkiness, 100 disables) FFB steer force neutral range="0.00300" // Max distance from center "neutral force" location where forces are reduced to help avoid oscillation (0.0 to disable) FFB steer force neutral function="0.00000" // Function to apply near neutral force location, in order to tune out FFB "deadzone" but keeping oscillations in check: 0.0=original, 1.0=new FFB steer force exponent="0.75000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity. FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction). FFB steer force output max="1.80000" // Maximum force output of steering force, recommendation 0.8 to 2.0 FFB steer force grip function="0.60000" // Range 0.0 to 1.0 (previous hardcoded value was 1.0) - lower values will make steering force decrease LATER as front tire grip is lost - try 0.3 FFB steer force grip weight="0.70000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force. FFB steer force grip factor="0.60000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6 (previously hardcoded to 0.4). How much of a factor the front wheel grip is on the steering weight. FFB steer front grip fract="0.50000" // Range 0.0 to 1.0 (previous hardcoded value was 0.0), additional effect of front grip loss on steering force FFB steer update threshold="0.0001500000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate. FFB steer friction coefficient="0.10000" // Coefficient to use for steering friction. Range: -1.0 to 1.0 FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0 FFB steer damper coefficient="0.10000" // Coefficient to use for steering damper. Range: -1.0 to 1.0 FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0 FFB throttle vibe freq mult="0.30000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50 FFB throttle vibe zero magnitude="0.09000" // Magnitude of engine vibration at 0rpm (reference point). FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude). FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB throttle vibe update thresh="0.02000" // Amount of change required to update throttle vibe (0.0 - 1.0) FFB brake vibe freq mult="0.90000" // Scales actual brake rotational frequency to force feedback vibration frequency. FFB brake vibe zero magnitude="0.09000" // Magnitude of brake vibration at 0mph (reference point). FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude). FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB brake vibe update thresh="0.02000" // Amount of change required to update brake vibe (0.0 to 1.0) FFB rumble strip magnitude="0.25000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect. FFB rumble strip freq mult="0.50000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev. FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB rumble strip pull factor="-0.70199" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5. FFB rumble strip update thresh="0.07500" // Amount of change required to update rumble strip effect (0.0 - 1.0) FFB jolt magnitude="1.00000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0. FFB Joy[00] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[00] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[00] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[01] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[01] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[00] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[00] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[00] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[00] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[01] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[01] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[01] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[01] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[02] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[02] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[02] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[02] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[03] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[03] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[03] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[03] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[04] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[04] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[04] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[04] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[05] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[05] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[05] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[05] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[06] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[06] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[06] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[06] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[07] Spring Saturation Pos="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[07] Spring Coefficient Pos="0.00000" // DirectInput Coefficient to use for spring FFB Joy[02] Axis[07] Spring Saturation Neg="1.00000" // DirectInput Saturation to use for spring FFB Joy[02] Axis[07] Spring Coefficient Neg="0.00000" // DirectInput Coefficient to use for spring Link to comment Share on other sites More sharing options...
rdasisva Posted June 10, 2013 Share Posted June 10, 2013 con piacere eccoti accontentato...io intanto prenderò una bella strillata virtuale dallo staff...per aver postato il papiro...e stato possibile solo cosi per me Link to comment Share on other sites More sharing options...
emi Posted June 10, 2013 Share Posted June 10, 2013 Perfetto grazie Link to comment Share on other sites More sharing options...
rdasisva Posted June 10, 2013 Share Posted June 10, 2013 (edited) la voce ffb weight factor di default era a o.90 io l ho messa a 0.60 più che altro per altre mod! se in certi casi trovi la sensazione di perdita dell aderenza sull' anteriore devi abbassare questo valore..da 0.90 0.60 dovrebbe andar bene questo controller lo uso per tutti i mod di f1, modifico solo il reall fell al bisogno. ora chiudo l' argomento...un po fuori topic! Edited June 10, 2013 by rdasisva Link to comment Share on other sites More sharing options...
emi Posted June 13, 2013 Share Posted June 13, 2013 Ritornando al discorso delle marce. Mi confermate che nel 92 Ferrari e Williams avevano il cambio con levette al volante mentre tutte le altre cambio manuale? Con leve al volante veniva azionata la frizione a pedale? Grazie Link to comment Share on other sites More sharing options...
Lu ManiaK Posted June 13, 2013 Share Posted June 13, 2013 Confermo. Avevano già anche la frizione al volante nel '92 (sempre e solo per partire e basta) se ricordo bene. Link to comment Share on other sites More sharing options...
alesanchez Posted June 13, 2013 Author Share Posted June 13, 2013 Avevano le leve del cambio: McLaren MP4/7 Williams Ligier Ferrari Non avevano le levette ma il cambio manuale: McLaren MP4/6B e tutte le altre.... Link to comment Share on other sites More sharing options...
EmaPa88 Posted June 13, 2013 Share Posted June 13, 2013 (edited) Ritornando al discorso delle marce. Mi confermate che nel 92 Ferrari e Williams avevano il cambio con levette al volante mentre tutte le altre cambio manuale? Con leve al volante veniva azionata la frizione a pedale? Grazie Da quanto ho letto in internet, la prima ad introdurre anche la frizione a volante fu la Ferrari che iniziò a testarla nel 1994 con Berger (Alesi preferì mantenere il pedale) per poi usarla in pianta stabile dal 1995 con la 412 T2. Avevo letto un articolo riguardo il test nel '94, mentre per la vettura '95 ho trovato la conferma in questo articolo. In ogni caso, così come avviene ora con la frizione al volante, quella a pedale veniva azionata solo al via o alla ripartenza dai box. Edited June 13, 2013 by Lestart Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now